Round Bar, Square Bar
Plastic material, Iron & Carbon Steel, Alloy steel, Aluminum, Copper, Other materials ex. Titanium, Inconel…
- Linear guides are used on saw-bow movement.
- Single vise clamping.
- Blade tilt detect sensor and readout(optional).
- Motor inverter speed control and blade speed readout
- Automatic chip conveyor.
- Vise pressure regulator(optional).
- Laser position guide line.
The metalworking band saw WL-1100SA is semi automatic type which is for cutting round and square bars. The saw-bow movement is based on linear guides, and the single vise clamping design is set for this model, with optional vise clamping pressure regulator, operators can handle much better. Motor inverter controls blade speed, and shows the results in digital readout. The blade tilt detect sensor, and readout are two optional features. The laser position guide line and the chip automatic conveyer are set to make the processing smoother.
|Cutting Capacity (HxW)||● 1100 mm||■ 1100 x 1100 mm|
|Blade Size||67 x 1.6 x 9800 mm|
|Blade Speed||20 ~ 85 MPM|
|Blade Motor||15 HP (11.2 KW)|
|Hydraulic Motor||5 HP (3.7 KW)|
|Coolant Motor||1/4 HP (0.2KW)|
|Hydraulic Tank||90 L|
|Coolant Tank||160 L|
|Table Height||620 mm|
|Vise Minimum Clamping||270 mm|
|Packing Size||4500 x 1600 x 3075 mm|
|N.W / G.W||7600 Kg / 8100 Kg|